EN 
- tegniese eienskappe
- Tegniese Parameters
Belangrikste tegniese kenmerke
● Gemaak van premium kwaliteit nikkellegeringsstaal 25SiMnCrNi2MoVA vir verhoogde duursaamheid en
slytasie eienskappe, en YK 05 wolframkarbied as dieselfde graad as internasionaal bekend
merk.
● Pas "warm (termiese) -invoeging" verwerkingsprosedure toe om die knoppies in te voeg soos dieselfde as
internasionaal bekende handelsmerk
● Hele CNC-verwerkingsprosedure verseker die kwaliteit konsekwentheid en betroubaar.
● Militêre graadvereistes van hittebehandeling waarborg duursaamheid, Spesifieke hittebehandeling
standaarde en spesiale "stresverligting"-prosesse verseker konsekwente prestasie.
● Ontwerp vir maksimum werkverrigting en gatskoonmaakvermoë en hoë penetrasietempo.
● Ons stukkies is uitruilbaar met Atlas Copco se COP32 34 44 54 64 84, Ingersoll-
Rand’s,DHD3.5,DHD3.5HD,DHD340A,DHD350R,DHD360,
Mission60,DHD380,QL40,QL50,QL60,QL80.SD10, NUMA100, NUMA120,etc
DTH Hammer Spesifikasies
| hamers | Bietjie skenkel | Verbindingsdraad | Geskikte bietjie | Werkdruk | verbruik lug | |
|---|---|---|---|---|---|---|
| 1-3" Middel-laagdruk | BR1 | RD40 boks | Φ64-Φ76 mm | 0.7-1.75Mpa | 0.7 Mpa |
4.5 m3 / min |
| DTH hamers | BR2 | RD50 boks | Φ70-Φ90 mm | 1.0 Mpa | 4 m3 / min | |
| BR3 | API 2 3/8" Reg | Φ90-Φ110 mm | 1.4 Mpa | 5 m3 / min | ||
| 3" hamers | DHD3.5 | API 2 3/8" Reg | Φ90-Φ110 mm | 1.0-1.5Mpa | 1.0 Mpa | 4.5 m3 / min |
| COP32/COP34 | ||||||
| M30 | 1.5 Mpa 9 m3/min | 9 m3 / min | ||||
| 4" hamers | DHD340 | API 2 3/8" Reg | Φ105-Φ130 mm | 1.0-2.5Mpa | 1.0 Mpa | 6 m3 / min |
| COP44 | ||||||
| QL40 | ||||||
| SD4 | 1.8 Mpa | 10 m3 / min | ||||
| M40 | 2.4 Mpa | 15 m3 / min | ||||
| 5" hamers | DHD350 | API 2 3/8" Reg | Φ130-Φ156 mm | 1.0-2.5Mpa | 1.0 Mpa | 9 m3 / min |
| COP54 | API 3 1/2" Reg | |||||
| QL50 | ||||||
| SD5 | 1.8 Mpa | 15 m3 / min | ||||
| M50 | 2.4 Mpa | 23 m3 / min | ||||
| 6" hamers | DHD360 | API 3 1/2" Reg |
Φ152-Φ203 mm | 1.0-2.5Mpa |
1.0 Mpa | 10 m3 / min |
| COP64 | ||||||
| QL60 | ||||||
| SD6 | 1.8 Mpa | 20 m3 / min | ||||
| M60 | 2.4 Mpa | 28.5 m3 / min | ||||
| 8" hamers | DHD380 | API 4 1/2" Reg | Φ200-Φ279 mm | 1.0-2.5Mpa | 1.0Mpa | 15m3 / min |
| COP84 | ||||||
| QL80 | ||||||
| SD8 | 1.8Mpa | 26m3 / min | ||||
| M80 | 2.4Mpa | 34m3 / min | ||||
| 10" hamers | SD10 | API 6 5/8" Reg | Φ254-Φ330 mm | 1.0-2.5Mpa | 1.0Mpa | 22m3 / min |
| NUMA100 | 1.8Mpa | 40m3 / min | ||||
| 2.4Mpa | 55m3 / min | |||||
| 12" hamers | DHD1120 | API 6 5/8" Reg | Φ305-Φ381 mm | 1.0-2.5Mpa | 1.0Mpa | 30m3 / min |
| SD12 | ||||||
DTH Hammer Bits Spesifikasies
| Hamer duim | Stukkies deursnee |
steel | |
|---|---|---|---|
| metrieke | Inch | ||
| 1" | 64mm-70mm | 2 1/2"-2 3/4" | BR1 |
| 2" | 70mm-95mm | 2 3/4"-3 3/4" | MACH20/BR2 |
| 3" | 90mm-102mm | 3 1/2"-4" | COP32/COP34/MACH303 |
| M30/DHD3.5/BR3 | |||
| 4" | 105mm-152mm | 4 1/8"-6" | COP44/DHD340/MACH44 |
| SD4/M40/QL40 | |||
| 5" | 133mm-165mm | 5 1/4"-6 1/2" | COP54/DHD350R/MACH50 |
| SD5/M50/QL50/BR5 | |||
| 6" | 152mm-254mm | 4 1/8"-10" | COP64/DHD360/SD6 |
| M60/QL60/Bulroc BR6 | |||
| 8" | 203mm-330mm | 8 "-13" | COP84/DHD380/SD8 |
| QL80/M80 | |||
| 10 " | 254mm-380mm | 10 "-15" | SD10 |
| NUMA100 | |||
| 12 " | 305mm-508mm | 12 "-20" | DHD1120/SD12 |
| NUMA120/NUMA125 | |||
Vir groot deursnee 12-30 duim stukkies is ook beskikbaar.